Banners are a great way to promote, sell, or communicate an idea, an event, or a product.  Even as there are many places to hang a banner, there are many ways to hang one as well.  In this blog we will give some of the more common ways to hang a banner made by BargainBanners.com.

When it comes time to hang your banners, you no longer have to worry about poking holes in the edges. Each banner comes with metal eyelets called grommets. These grommets are positioned on all four corners of your banner to make hanging fast and easy. They are also placed every 2-3 feet across the top and the bottom of the banner to provide added support. They can help keep the banner suspended without cutting through the material. 

Hanging a banner indoors:  

For permanent indoor displays, banners can be hung using nails or screws and washers.  For less-permanent hangings, there are snap kits or zip ties to hang the banner from the ceiling, suction cups or tape to display it in a window, or tacks to hang it on a wall, cork board or other surfaces.  String, rope, or bungee cords also work well to hold a banner in place.  What you use to hang your banner is largely determined by where you want to hang it.  

Hanging a banner outdoors:  

For permanent outdoor displays, banners can be hung using the same materials as indoors:  nails, screws and washers.  Some customers have used glue against a smooth flat surface.  For less-permanent hangings, the number one recommendation is to use bungee cords.  They allow a small amount of give on a windy day, and can wrap around pillars and poles easily.  A chain-link fence is a handy spot to hang a banner, using snap kits, zip ties, string, or rope.  If the banner is being hung in an area with heavy winds, be sure to use a heavy zip tie.  If there isn’t a building, fence or pole nearby, steel posts can be put it the ground and used instead.

Some customers have asked about ‘wind slits’.  ‘Wind slits’ are cuts in the vinyl that allow the wind to more easily move through the banner and reduce the pull on it.  We generally do not recommend them.  A ’slit’ weakens the vinyl and can be the starting point for a tear to begin.  If your situation calls for ‘wind slits’ you may add them as needed using a paint can as the template and a utility knife to cut the vinyl.